[gpfsug-discuss] Spectrum Scale CES and remote file system mounts
Simon Thompson (IT Research Support)
S.J.Thompson at bham.ac.uk
Thu May 3 18:30:32 BST 2018
Yes we do this when we really really need to take a remote FS offline, which we try at all costs to avoid unless we have a maintenance window.
Note if you only export via SMB, then you don’t have the same effect (unless something has changed recently)
Simon
From: <gpfsug-discuss-bounces at spectrumscale.org> on behalf of "valleru at cbio.mskcc.org" <valleru at cbio.mskcc.org>
Reply-To: "gpfsug-discuss at spectrumscale.org" <gpfsug-discuss at spectrumscale.org>
Date: Thursday, 3 May 2018 at 15:41
To: "gpfsug-discuss at spectrumscale.org" <gpfsug-discuss at spectrumscale.org>
Subject: Re: [gpfsug-discuss] Spectrum Scale CES and remote file system mounts
Thanks Mathiaz,
Yes i do understand the concern, that if one of the remote file systems go down abruptly - the others will go down too.
However, i suppose we could bring down one of the filesystems before a planned downtime?
For example, by unexporting the filesystems on NFS/SMB before the downtime?
I might not want to be in a situation, where i have to bring down all the remote filesystems because of planned downtime of one of the remote clusters.
Regards,
Lohit
On May 3, 2018, 7:41 AM -0400, Mathias Dietz <MDIETZ at de.ibm.com>, wrote:
Hi Lohit,
>I am thinking of using a single CES protocol cluster, with remote mounts from 3 storage clusters.
Technically this should work fine (assuming all 3 clusters use the same uids/guids). However this has not been tested in our Test lab.
>One thing to watch, be careful if your CES root is on a remote fs, as if that goes away, so do all CES exports.
Not only the ces root file system is a concern, the whole CES cluster will go down if any remote file systems with NFS exports is not available.
e.g. if remote cluster 1 is not available, the CES cluster will unmount the corresponding file system which will lead to a NFS failure on all CES nodes.
Mit freundlichen Grüßen / Kind regards
Mathias Dietz
Spectrum Scale Development - Release Lead Architect (4.2.x)
Spectrum Scale RAS Architect
---------------------------------------------------------------------------
IBM Deutschland
Am Weiher 24
65451 Kelsterbach
Phone: +49 70342744105
Mobile: +49-15152801035
E-Mail: mdietz at de.ibm.com
-----------------------------------------------------------------------------
IBM Deutschland Research & Development GmbH
Vorsitzender des Aufsichtsrats: Martina Koederitz, Geschäftsführung: Dirk WittkoppSitz der Gesellschaft: Böblingen / Registergericht: Amtsgericht Stuttgart, HRB 243294
From: valleru at cbio.mskcc.org
To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org>
Date: 01/05/2018 16:34
Subject: Re: [gpfsug-discuss] Spectrum Scale CES and remote file system mounts
Sent by: gpfsug-discuss-bounces at spectrumscale.org
________________________________
Thanks Simon.
I will make sure i am careful about the CES root and test nfs exporting more than 2 remote file systems.
Regards,
Lohit
On Apr 30, 2018, 5:57 PM -0400, Simon Thompson (IT Research Support) <S.J.Thompson at bham.ac.uk>, wrote:
You have been able to do this for some time, though I think it's only just supported.
We've been exporting remote mounts since CES was added.
At some point we've had two storage clusters supplying data and at least 3 remote file-systems exported over NFS and SMB.
One thing to watch, be careful if your CES root is on a remote fs, as if that goes away, so do all CES exports. We do have CES root on a remote fs and it works, just be aware...
Simon
________________________________________
From: gpfsug-discuss-bounces at spectrumscale.org [gpfsug-discuss-bounces at spectrumscale.org] on behalf of valleru at cbio.mskcc.org [valleru at cbio.mskcc.org]
Sent: 30 April 2018 22:11
To: gpfsug main discussion list
Subject: [gpfsug-discuss] Spectrum Scale CES and remote file system mounts
Hello All,
I read from the below link, that it is now possible to export remote mounts over NFS/SMB.
https://www.ibm.com/support/knowledgecenter/en/STXKQY_5.0.0/com.ibm.spectrum.scale.v5r00.doc/bl1adv_protocoloverremoteclu.htm
I am thinking of using a single CES protocol cluster, with remote mounts from 3 storage clusters.
May i know, if i will be able to export the 3 remote mounts(from 3 storage clusters) over NFS/SMB from a single CES protocol cluster?
Because according to the limitations as mentioned in the below link:
https://www.ibm.com/support/knowledgecenter/STXKQY_5.0.0/com.ibm.spectrum.scale.v5r00.doc/bl1adv_limitationofprotocolonRMT.htm
It says “You can configure one storage cluster and up to five protocol clusters (current limit).”
Regards,
Lohit
_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss
_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20180503/a39f6d06/attachment.htm>
More information about the gpfsug-discuss
mailing list