[gpfsug-discuss] Setting up IBM Spectrum Scale performance monitoring bridge for Grafana

Chakravarthy Girda cgirda at wustl.edu
Tue Jul 18 15:57:05 BST 2017


Bob,

 Found the issue to be with https is getting blocked with "direct"
connection. Switched it to proxy on the bridge-port. That helped and now
I can see graphs.


Thank you
Chakri



On 7/18/17 6:45 AM, Oesterlin, Robert wrote:
> Hi Chakri
>
> If you’re getting the ‘ole “spinning wheel” on your dashboard, then it’s one of two things:
>
> 1) The Grafana bridge is not running
> 2) The dashboard is requesting a metric that isn’t available.
>
> Assuming that you’ve verified that the pmcollector/pmsensor setup is work right in your cluster, I’d then start looking at the log files for the Grafana Bridge and the pmcollector to see if you can determine if either is producing an error - like the metric wasn’t found. The other thing to try is setup a small test graph with a known metric being collected by you pmsensor configuration, rather than try one of Helene’s default dashboards, which are fairly complex.
>
> Drop me a note directly if you need to.
>
> Bob Oesterlin
> Sr Principal Storage Engineer, Nuance
>
>  
>
>  
>
> _______________________________________________
> gpfsug-discuss mailing list
> gpfsug-discuss at spectrumscale.org
> http://gpfsug.org/mailman/listinfo/gpfsug-discuss




More information about the gpfsug-discuss mailing list