[gpfsug-discuss] 4.2.0 and callhome

[Simon Thompson (Research Computing - IT Services)]

Thanks for the pointer Paul. It appears that search for anything in the docs, doesn't work ...

Simon

From: <gpfsug-discuss-bounces at spectrumscale.org<mailto:gpfsug-discuss-bounces at spectrumscale.org>> on behalf of Paul Roberts <PAULROBE at uk.ibm.com<mailto:PAULROBE at uk.ibm.com>>
Reply-To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org<mailto:gpfsug-discuss at spectrumscale.org>>
Date: Tuesday, 24 November 2015 at 13:45
To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org<mailto:gpfsug-discuss at spectrumscale.org>>
Subject: Re: [gpfsug-discuss] 4.2.0 and callhome

Hi Simon,

there is a section on call home in the Spectrum Scale 4.2 knowledge centre:
http://www-01.ibm.com/support/knowledgecenter/STXKQY_4.2.0/ibmspectrumscale42_welcome.html

It's chapter 24 in the
"IBM Spectrum Scale V4.2: Advanced Administration Guide"
section which is available as a pdf here:

http://www-01.ibm.com/support/knowledgecenter/api/content/nl/en-us/STXKQY_4.2.0/c2370323.pdf

Hope that helps give you some idea, I'm sure someone with more knowledge about Call Home can answer any specific queries.

Best wishes,

Paul
======================================================
Dr Paul Roberts, IBM Spectrum Scale - Development Engineer
IBM Systems UK
IBM Manchester Lab, 40 Blackfriars Street, Manchester, M3 2EG, UK

E-mail: paulrobe at uk.ibm.com<mailto:paulrobe at uk.ibm.com>,
Telephone: (+44) 161 2140424
======================================================



From:        "Simon Thompson (Research Computing - IT Services)" <S.J.Thompson at bham.ac.uk<mailto:S.J.Thompson at bham.ac.uk>>
To:        gpfsug main discussion list <gpfsug-discuss at spectrumscale.org<mailto:gpfsug-discuss at spectrumscale.org>>
Date:        24/11/2015 12:48
Subject:        [gpfsug-discuss] 4.2.0 and callhome
Sent by:        gpfsug-discuss-bounces at spectrumscale.org<mailto:gpfsug-discuss-bounces at spectrumscale.org>
________________________________



Does anyone know what the call home rpm packages in the 4.2.0 release do?

The upgrade/install guide tells me to "rpm -i *.rpm", but I'd like to know
what this call home stuff is before just blindly installing it. Searching
for "call home" and "callhome" in the online docs doesn't seems to find
anything. Anyone any insight on what this is all about?

Thanks

Simon

_______________________________________________
gpfsug-discuss mailing list
gpfsug-discuss at spectrumscale.org
http://gpfsug.org/mailman/listinfo/gpfsug-discuss


Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number 741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20151124/0cf4718a/attachment.htm>