[gpfsug-discuss] gpfsug-discuss Digest, Vol 5, Issue 9
Jez Tucker
Jez.Tucker at rushes.co.uk
Fri Jun 1 08:31:45 BST 2012
Try this: https://www-304.ibm.com/support/docview.wss?uid=swg21459480
Though; you're evaluating GPFS + TSM with a view to purchase.
Are you not receiving the level of pre-sales technical support to enable you to perform your evaluation successfully? (Only that we're in different time zones and your local IBM support should be much faster)
From: gpfsug-discuss-bounces at gpfsug.org [mailto:gpfsug-discuss-bounces at gpfsug.org] On Behalf Of Grace Tsai
Sent: 01 June 2012 01:30
To: gpfsug-discuss at gpfsug.org
Subject: Re: [gpfsug-discuss] gpfsug-discuss Digest, Vol 5, Issue 9
Hi, Jez,
Sorry to bother you again.
I ran "dsmmigfs add -ht=85 -lt=75 /gpfs_directory1",
and restarted all the related dsm,hsm,mm processes, so finally,
dsmsmj shows the directory "/gpfs_directory1" is in status "active".
So I added a lot of files into directory "/gpfs_directory1" until it is 100% full.
But the files in "/gpfs_directory1" just dont migrate to TSM.
The "dsmerror.log" just keeps showing the following errors every 20 seconds:
05/31/12 17:25:02 ANS9592E A SOAP TCP connection error has happened!
05/31/12 17:25:02 ANS9590E The SOAP error information: HSM_Comm_ResponsivenessServiceJoin failed, reason: Connection refused
I checked the URL
Ref: http://www-304.ibm.com/support/docview.wss?uid=swg21358488
Ref: http://www-304.ibm.com/support/docview.wss?uid=swg21416853
and followed the steps in these two pages, but I still got the same errors in dsmerror.log.
Could you help please? Thanks.
Grace
Date: Wed, 30 May 2012 16:14:17 +0000
From: Jez Tucker <Jez.Tucker at rushes.co.uk<mailto:Jez.Tucker at rushes.co.uk>>
To: gpfsug main discussion list <gpfsug-discuss at gpfsug.org<mailto:gpfsug-discuss at gpfsug.org>>
Subject: Re: [gpfsug-discuss] Use HSM to backup GPFS -error message:
ANS9085E
Message-ID:
<39571EA9316BE44899D59C7A640C13F53059E38F at WARVWEXC1.uk.deluxe-eu.com<mailto:39571EA9316BE44899D59C7A640C13F53059E38F at WARVWEXC1.uk.deluxe-eu.com>>
Content-Type: text/plain; charset="windows-1252"
So. My hunch from looking at my system here is that you haven't actually told dsm that the filesystem is to be space managed.
You do that here:
http://pic.dhe.ibm.com/infocenter/tsminfo/v6r2/topic/com.ibm.itsm.hsmul.doc/t_add_spc_mgt.html
Then re-run dsmmigfs query -Detail and hopefully you should see something similar to this:
[root at tsm01 ~]# dsmmigfs query -Detail
IBM Tivoli Storage Manager
Command Line Space Management Client Interface
Client Version 6, Release 2, Level 4.1
Client date/time: 30-05-2012 17:13:00
(c) Copyright by IBM Corporation and other(s) 1990, 2012. All Rights Reserved.
The local node has Node ID: 3
The failover environment is deactivated on the local node.
File System Name: /mnt/gpfs
High Threshold: 100
Low Threshold: 80
Premig Percentage: 20
Quota: 999999999999999
Stub Size: 0
Server Name: TSM01
Max Candidates: 100
Max Files: 0
Min Partial Rec Size: 0
Min Stream File Size: 0
MinMigFileSize: 0
Preferred Node: tsm01 Node ID: 3
Owner Node: tsm01 Node ID: 3
Source Nodes: tsm01
Then see if your HSM GUI works properly.
From: gpfsug-discuss-bounces at gpfsug.org<mailto:gpfsug-discuss-bounces at gpfsug.org> [mailto:gpfsug-discuss-bounces at gpfsug.org<mailto:gpfsug-discuss-bounces at gpfsug.org>] On Behalf Of Grace Tsai
Sent: 30 May 2012 17:06
To: gpfsug-discuss at gpfsug.org<mailto:gpfsug-discuss at gpfsug.org>; Jez.Tucker at rushes.co.org<mailto:Jez.Tucker at rushes.co.org>
Subject: [gpfsug-discuss] Use HSM to backup GPFS -error message: ANS9085E
Hi, Jez,
Thanks to reply my questions.
Here is the output of "dsmmigfs query -Detail" and "ps -ef | grep dsm".
On GPFS server,
dsmmigfs query -Detail
=>
IBM Tivoli Storage Manager
Command Line Space Management Client Interface
Client Version 6, Release 3, Level 0.0
Client date/time: 05/30/12 08:51:55
(c) Copyright by IBM Corporation and other(s) 1990, 2011. All Rights Reserved.
The local node has Node ID: 1
The failover environment is active on the local node.
The recall distribution is enabled.
On GPFS server,
ps -ef | grep dsm
=>
root 6157 1 0 May29 ? 00:00:00 /opt/tivoli/tsm/client/hsm/bin/dsmrootd
root 6158 1 0 May29 ? 00:00:03 /opt/tivoli/tsm/client/hsm/bin/dsmmonitord
root 6159 1 0 May29 ? 00:00:14 /opt/tivoli/tsm/client/hsm/bin/dsmscoutd
root 6163 1 0 May29 ? 00:00:37 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 6165 1 0 May29 ? 00:00:00 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 6626 4331 0 08:52 pts/0 00:00:00 grep dsm
root 9034 1 0 May29 ? 00:00:35 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 9035 1 0 May29 ? 00:00:00 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 14278 1 0 May29 ? 00:00:00 /opt/tivoli/tsm/client/ba/bin/dsmcad
root 22236 1 0 May29 ? 00:00:35 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 22237 1 0 May29 ? 00:00:00 /opt/tivoli/tsm/client/hsm/bin/dsmrecalld
root 24080 4248 0 May29 pts/1 00:00:00 /bin/ksh /usr/bin/dsmsmj
root 24083 24080 0 May29 pts/1 00:00:39 java -DDSM_LANG= -DDSM_LOG=/ -DDSM_DIR= -DDSM_ROOT=/opt/tivoli/tsm/client/hsm/bin/../../ba/bin -jar lib/dsmsm.jar
Thanks.
Grace
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss/attachments/20120530/ee7a6e0b/attachment-0001.html>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20120601/4b4dd980/attachment-0001.htm>
More information about the gpfsug-discuss
mailing list